пятница, 16 января 2015
Смотрим что и где ищет ld:
Потом просто подсовываем ему то, что нужно.
Потом просто подсовываем ему то, что нужно.
пятница, 20 июня 2014
Option 'comp-lzo' '1' isn't work yet with client on x86, error message on client side (Linux/x86) is: "Bad LZO decompression header byte: 42", error message on server side (OpenWRT/MIPS): "IP packet with unknown IP version=15 seen".
четверг, 19 июня 2014
-------------------------------------------------------------------------------
IMPORTANT! MAKE SURE TO READ THE FOLLOWING!
Please remember to reinstall this port after kernel source update. Using AoE
devices on boot is a little tricky because the network must be up before the
system can access an AoE device. The current rc boot method for automounting
filesystems will not work with AoE devices; vinum and mount -a are both run
before bringing up the network.
In order to use AoE devices on boot a few rc.conf variables have been defined
that permit the boot sсript (/etc/rc.d/aoe) to initialize systems using AoE
devices after the network is up. They are as follows:
aoe_enable Set to "Yes" to enable the aoe startup sсript.
aoe_iflist A space separated string of interfaces valid for AoE.
aoe_wc Set to "1" to enable write cache on AoE device.
aoe_mounts A space seperated string of AoE device nodes to be mounted.
(An entry for each needs to be in /etc/fstab as well with the
"noauto" option.)
For example, the following added to /etc/rc.conf:
aoe_enable="Yes"
aoe_iflist="em0 em1"
aoe_wc="1"
aoe_mounts="/dev/aoed0s1a /dev/aoed1s1a"
and the following added to /etc/fstab:
# Device Mountpoint FStype Options Dump Pass#
/dev/aoed0s1a /mnt/a ufs rw,noauto 0 0
/dev/aoed1s1a /mnt/b ufs rw,noauto 0 0
will automatically start the AoE driver and mount the /mnt/a and /mnt/b
"blades". See aoe(4) and www.coraid.com/support/freebsd/usingaoe.html
for more information.
-stacey.
IMPORTANT! MAKE SURE TO READ THE ABOVE!
-------------------------------------------------------------------------------
IMPORTANT! MAKE SURE TO READ THE FOLLOWING!
Please remember to reinstall this port after kernel source update. Using AoE
devices on boot is a little tricky because the network must be up before the
system can access an AoE device. The current rc boot method for automounting
filesystems will not work with AoE devices; vinum and mount -a are both run
before bringing up the network.
In order to use AoE devices on boot a few rc.conf variables have been defined
that permit the boot sсript (/etc/rc.d/aoe) to initialize systems using AoE
devices after the network is up. They are as follows:
aoe_enable Set to "Yes" to enable the aoe startup sсript.
aoe_iflist A space separated string of interfaces valid for AoE.
aoe_wc Set to "1" to enable write cache on AoE device.
aoe_mounts A space seperated string of AoE device nodes to be mounted.
(An entry for each needs to be in /etc/fstab as well with the
"noauto" option.)
For example, the following added to /etc/rc.conf:
aoe_enable="Yes"
aoe_iflist="em0 em1"
aoe_wc="1"
aoe_mounts="/dev/aoed0s1a /dev/aoed1s1a"
and the following added to /etc/fstab:
# Device Mountpoint FStype Options Dump Pass#
/dev/aoed0s1a /mnt/a ufs rw,noauto 0 0
/dev/aoed1s1a /mnt/b ufs rw,noauto 0 0
will automatically start the AoE driver and mount the /mnt/a and /mnt/b
"blades". See aoe(4) and www.coraid.com/support/freebsd/usingaoe.html
for more information.
-stacey.
IMPORTANT! MAKE SURE TO READ THE ABOVE!
-------------------------------------------------------------------------------
NOTE: This port has been compiled with a default pwcheck_method of
auxprop. If you want to authenticate your user by /etc/passwd,
PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
set sasl_pwcheck_method to saslauthd after installing the
Cyrus-IMAPd 2.X port. You should also check the
/usr/local/lib/sasl2/*.conf files for the correct
pwcheck_method.
If you want to use GSSAPI mechanism, install
ports/security/cyrus-sasl2-gssapi.
If you want to use LDAP auxprop plugin, install
ports/security/cyrus-sasl2-ldapdb.
===>>> pkg-message for samba41-4.1.7
===============================================================================
How to start: wiki.samba.org/index.php/Samba4/HOWTO
* Your configuration is: /usr/local/etc/smb4.conf
* All the relevant databases are under: /var/db/samba4
* All the logs are under: /var/log/samba4
* Provisioning sсript is: /usr/local/bin/samba-tool
You will need to specify location of the 'nsupdate' command in the
smb4.conf file:
nsupdate command = /usr/local/bin/samba-nsupdate -g
For additional documentation check: wiki.samba.org/index.php/Samba4
Bug reports should go to the: bugzilla.samba.org/
===============================================================================
===>>> Done displaying pkg-message files
auxprop. If you want to authenticate your user by /etc/passwd,
PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and
set sasl_pwcheck_method to saslauthd after installing the
Cyrus-IMAPd 2.X port. You should also check the
/usr/local/lib/sasl2/*.conf files for the correct
pwcheck_method.
If you want to use GSSAPI mechanism, install
ports/security/cyrus-sasl2-gssapi.
If you want to use LDAP auxprop plugin, install
ports/security/cyrus-sasl2-ldapdb.
===>>> pkg-message for samba41-4.1.7
===============================================================================
How to start: wiki.samba.org/index.php/Samba4/HOWTO
* Your configuration is: /usr/local/etc/smb4.conf
* All the relevant databases are under: /var/db/samba4
* All the logs are under: /var/log/samba4
* Provisioning sсript is: /usr/local/bin/samba-tool
You will need to specify location of the 'nsupdate' command in the
smb4.conf file:
nsupdate command = /usr/local/bin/samba-nsupdate -g
For additional documentation check: wiki.samba.org/index.php/Samba4
Bug reports should go to the: bugzilla.samba.org/
===============================================================================
===>>> Done displaying pkg-message files
воскресенье, 06 апреля 2014
пятница, 28 марта 2014
пятница, 14 марта 2014
inode/directory - файловый менеджер по умолчанию.
Я использую dolphin, для того что бы fluxbox заставить использовать его по умолчанию, мне нужно настроить mime тип
Теперь тот же dropbox будет открывать папки в указанном файловом менеджере, а не в браузере.
Я использую dolphin, для того что бы fluxbox заставить использовать его по умолчанию, мне нужно настроить mime тип
Теперь тот же dropbox будет открывать папки в указанном файловом менеджере, а не в браузере.
среда, 05 февраля 2014
вторник, 28 января 2014
суббота, 25 января 2014
Состав:
* GParted
* GParted
From the Apple (
menu, choose System Preferences.
Click Spotlight.
Click the Privacy tab.
Drag a folder or an entire volume (your hard drive) to the list.
If prompted for confirmation, click OK.
Remove the item or volume you just added to the list by clicking it and then clicking the minus ("-") button.
Close Spotlight preferences.
http://support.apple.com/kb/ht2409
![;)](http://static.diary.ru/picture/1136.gif)
Click Spotlight.
Click the Privacy tab.
Drag a folder or an entire volume (your hard drive) to the list.
If prompted for confirmation, click OK.
Remove the item or volume you just added to the list by clicking it and then clicking the minus ("-") button.
Close Spotlight preferences.
http://support.apple.com/kb/ht2409
вторник, 21 января 2014
среда, 15 января 2014
вторник, 14 января 2014
четверг, 26 декабря 2013
пятница, 20 декабря 2013
11:25
Доступ к записи ограничен
Закрытая запись, не предназначенная для публичного просмотра
воскресенье, 08 декабря 2013
/etc/X11/app-defaults/XXkb
четверг, 21 ноября 2013
* Правим файл /etc/oratab
* После этого можем пользоваться утилитами запуска идущими в поставке с базой:
* Используем следующий сценарий для автозапуска (назовём его oraStartStop:
* Добавляем в автозапуск
* После этого можем пользоваться утилитами запуска идущими в поставке с базой:
* Используем следующий сценарий для автозапуска (назовём его oraStartStop:
* Добавляем в автозапуск